濟南自動變速箱維修：故障的根源是因?yàn)楦邷匾鸬?/h1>

發布日期： 2025-10-21 來源： http://www.566605.com/ 點擊： 0

　　頓挫感是怎樣的感受？相信很多車主都深有體會，當掛擋完成以后，要是直接放開離合就會熄火；當慢慢放離合，踩油門的時候，在車速和擋位不匹配的情況下容易出現拖擋，車子一卡一卡地向前走但又不熄火時的那種感覺就是頓挫感。

　　What is the feeling of jerking? I believe many car owners have experienced that after shifting gears, if they release the clutch directly, the engine will stall; When slowly releasing the clutch and stepping on the accelerator, it is easy to experience jerking when the vehicle speed and gear are not matched. The feeling of the car moving forward one by one without stalling is a jerking sensation.

　　什么情況下最容易產生頓挫？

　　Under what circumstances are jolts most likely to occur?

　　急加速或者剎車后再加速這兩種情況是最容易產生頓挫的，電腦的換擋邏輯是根據駕駛者踩油門情況來進行判斷分析的，正常情況下，當駕駛者慢慢加油，電腦的原本邏輯只需要升擋就可以完成加速，但是由于力度過大，離合器在升擋途中發現需要降擋才能完成這次急加速的意圖，此時又立馬進行減擋處理，這樣一來一回的時間里面，動力不能夠順暢地傳輸，這樣就容易產生頓挫了。一般來說，車子頓挫是因?yàn)榘l(fā)動機的轉速與離合器片的轉速不同步引起的，那具體有哪些原因呢，下面來分析分析：

　　The two situations that are most prone to jerking are sudden acceleration or accelerating after braking. The shift logic of the computer is judged and analyzed based on the driver's stepping on the accelerator. Under normal circumstances, when the driver slowly refuels, the computer's original logic only needs to upshift to complete the acceleration. However, due to excessive force, the clutch discovers that it needs to downshift during the upshift to complete the intention of this sudden acceleration. At this time, it immediately downshifts. In this way, power cannot be transmitted smoothly during the back and forth time, which can easily cause jerking. Generally speaking, car jolts are caused by the engine speed not synchronizing with the clutch plate speed. What are the specific reasons for this? Let's analyze them below:

　　一、正常的原因

　　1、 Normal reasons

　　1、升擋頓挫多數原因是因?yàn)樽兯傧涞南鄳?yīng)速度不夠快，升擋速度跟不上你踩油門的速度，所以在變速箱換擋的一剎那，頓挫感就來了。2、降擋頓挫多數是因?yàn)槟芰炕厥障到y(tǒng)的介入，一旦駕駛者松開油門踏板或踩下制動踏板，發電機會立即開始工作，就會搭上發動機，給發動機造成一些負擔，影響發動機的轉速，使發動機轉速與離合器片轉速不同步，這樣就會有頓挫的感覺。3、低速頓挫很多車主有這種情況，由于低速行駛的時候擋位在一二擋之間頻繁切換，離合器不斷的分離和結合，短時間內不能暢順地完成動力傳輸，就造成了常見的低速頓挫，啟動與低速的時候會有頓挫感，這個正常的話一般是低轉速的時候渦輪增壓介入，影響了發動機轉速。

　　1. Most of the reasons for upshifting jerks are because the corresponding speed of the gearbox is not fast enough, and the upshifting speed cannot keep up with the speed at which you step on the accelerator, so the jerking feeling comes at the moment when the gearbox shifts gears. 2. Downshifting jerks are mostly caused by the intervention of the energy recovery system. Once the driver releases the accelerator pedal or steps on the brake pedal, the generator will immediately start working, which will put some burden on the engine and affect its speed. This will cause the engine speed to be out of sync with the clutch plate speed, resulting in a jerky feeling. 3. Many car owners experience low-speed jerking. Due to frequent gear shifts between first and second gears while driving at low speeds, the clutch constantly disengages and engages, preventing smooth power transmission in a short period of time, resulting in common low-speed jerking. There is a jerking sensation during start-up and low-speed driving, which is usually caused by turbocharger intervention at low speeds, affecting engine speed.

　　二、不正常的原因

　　2、 Abnormal reasons

　　1、變速箱擋位程序設定問題；2、變速箱內部臟污和雜質，內部臟污或雜質導致不能對變速箱油壓進行有效調節，從而造成頓挫；3、變速箱散熱問題，變速箱散熱不良，會導致變速箱異常高溫，從而影響變速箱油的性能，如果溫度超過120℃，變速箱的橡膠密封材料會變硬，造成變速箱滲漏，從而影響油壓，造成頓挫。

　　1. Gearbox gear program setting issue; 2. The internal dirt and impurities of the gearbox prevent effective adjustment of the gearbox oil pressure, resulting in jerking; 3. The problem of transmission heat dissipation is that poor transmission heat dissipation can cause abnormal high temperatures in the transmission, thereby affecting the performance of the transmission oil. If the temperature exceeds 120 ℃, the rubber sealing material of the transmission will harden, causing transmission leakage and affecting oil pressure, resulting in jerking.

　　三、處理步驟

　　3、 Processing steps

　　1、先對照上面說的“正常原因”，想想這個頓挫是不是正常的，一般來說如果這頓挫感一直有，那么應該是正常的，如果某天突然感覺不一樣了，那就可能有問題了；2、檢查變速箱的溫度是不是正常，如果不正常，檢查變速箱散熱系統，散熱沒問題，繼續看下面的；3、對變速箱電腦系統進行重新編程設置；4、更換變速箱油，換變速箱油需2年或4萬公里更換一次；5、檢查變速箱內部閥體是否有損壞。

　　1. First, compare with the "normal reasons" mentioned above and think about whether this jerky is normal. Generally speaking, if this jerky feeling persists, it should be normal. If one day you suddenly feel different, there may be a problem; 2. Check if the temperature of the gearbox is normal. If it is not normal, check the gearbox cooling system. If there is no problem with the cooling, continue reading below; 3. Reprogram the transmission computer system; 4. Replace the transmission oil, which needs to be changed every 2 years or 40000 kilometers; 5. Check if the internal valve body of the gearbox is damaged.

　　本文由 濟南自動變速箱維修  友情奉獻.更多有關的知識請點擊  http://www.566605.com/  真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from Jinan Automatic Transmission Maintenance For more related knowledge, please click http://www.566605.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.

關鍵詞： 自動變速器故障檢測一般程序 自動變速箱常見幾種狀況有哪些？ 汽車變速箱進水后怎么維修？ 汽車變速箱基礎知識的特點講解 自動變速箱維修保養要注意什么？