變速箱的設計目的是幫助移動車輛從發動機很少的努力，保持變速箱的清潔和正確操作，確保更長的使用壽命。此外您要知道變速箱維修時要驗證自動裝置的狀態，下面濟南自動變速箱維修人員來講講。

The gearbox is designed to help move the vehicle from the engine with little effort, keep the gearbox clean and operate correctly, and ensure a longer service life. In addition, you should know that the status of the automatic device should be verified during the maintenance of the transmission. Next, Jinan automatic transmission maintenance personnel will talk about it.

1.打開引擎蓋，檢查傳動液。大多數車輛都有一個量油尺來檢測傳動液。一些車輛在變速箱頂部有一個塞子，用來拆卸和檢查流體。其他車輛可能被認為是不可使用的，這意味著您不能傳輸服務。

1. Open the engine hood and check the transmission fluid. Most vehicles have an oil dipstick to check the transmission fluid. Some vehicles have a plug on the top of the transmission to remove and check the fluid. Other vehicles may be considered unusable, which means you cannot transmit services.

2.開車?yán)@過街區。注意傳動裝置在所有齒輪間的變速。確保換擋時沒有延時，這可能導致傳輸失敗。

2. Drive around the block. Pay attention to the speed change of the transmission between all gears. Make sure there is no delay when shifting, which may cause transmission failure.

3.檢查泄漏的液體。測試結束后，拿起手電筒，從引擎蓋下或車下看一下變速箱。確認在任何位置沒有從變速箱漏出液體。

3. Check the leaking liquid. After the test, take the flashlight and look at the gearbox from under the hood or the car. Make sure that there is no fluid leaking from the transmission at any position.

此外保護好變速箱就要在駕駛習慣上面下功夫。

In addition, to protect the gearbox, we must work hard on driving habits.

1.啟動車輛，并在助手的幫助下進行試駕。讓助手在您操作車輛時監控儀表板，寫下傳輸何時移動以及傳輸以什么RPM移動。大多數車輛都有轉速表，但如果沒有轉速表，請助手記下變速箱的轉速。

1. Start the vehicle and test drive it with the help of an assistant. Have an assistant monitor the instrument panel as you operate the vehicle and write down when the transmission moves and at what RPM. Most vehicles have a tachometer, but if there is no tachometer, ask an assistant to record the speed of the transmission.

2.路測結束后，對記錄的數據進行分析。看看每分鐘轉數或移動速度是多少。

2. After the road test, analyze the recorded data. See how many revolutions per minute or movement speed is.

3.將車輛取出進行另一次試駕。當你換擋時，要努力改變。這可能是加速或減速的關系，你踩多少油門踏板。

3. Take the vehicle out for another test drive. When you shift gears, try to change. This may be the relationship between acceleration and deceleration, and how much accelerator pedal you step on.

變速箱維修時要驗證自動裝置的狀態相關內容就講解到這里了，您對此有什么問題就來我們網站http://www.566605.com進行咨詢吧！

This is all about verifying the status of the automatic device during gearbox maintenance. If you have any questions, please come to our website http://www.566605.com Consult!